Japanese input methods
Japanese input methods are the methods used to input Japanese characters on a computer.
There are two main methods of inputting Japanese on computers. One is via a romanized version of Japanese called rōmaji (literally "Roman letters"), and the other is via keyboard keys corresponding to the Japanese kana. Some systems may also work via a graphical user interface, or GUI, where the characters are chosen by clicking on buttons or image maps.
Contents
Japanese keyboards
Japanese keyboards (as shown on the second image) have both hiragana and Roman letters indicated. The JIS, or Japanese Industrial Standard, keyboard layout keeps the Roman letters in the English QWERTY layout, with numbers above them. Many of the non-alphanumeric symbols are the same as on English-language keyboards, but some symbols are located in other places. The hiragana symbols are also ordered in a consistent way across different keyboards. For example, the Q, W, E, R, T, Y keys correspond to た, て, い, す, か, ん respectively (the English sounds for the previous hiragana symbols are: ta, te, i, su, ka, and n respectively) when the computer is used for direct hiragana input.
Input keys
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Since Japanese input requires switching between Roman and hiragana entry modes, and also conversion between hiragana and kanji (as discussed below), there are usually several special keys on the keyboard. This varies from computer to computer, and some OS vendors have striven to provide a consistent user interface regardless of the type of keyboard being used. On non-Japanese keyboards, option- or control- key sequences can perform all of the tasks mentioned below.
On most Japanese keyboards, one key switches between Roman characters and Japanese characters. Sometimes, each mode (Roman and Japanese) may even have its own key, in order to prevent ambiguity when the user is typing quickly.
There may also be a key to instruct the computer to convert the latest hiragana characters into kanji, although usually the space key serves the same purpose since Japanese writing doesn't use spaces.
Some keyboards have a mode key to switch between different forms of writing. This of course would only be the case on keyboards that contain more than one set of Japanese symbols. Hiragana, katakana, halfwidth katakana, halfwidth Roman letters, and fullwidth Roman letters are some of the options. A typical Japanese character is square while Roman characters are typically variable in width. Since all Japanese characters occupy the space of a square box, it is sometimes desirable to input Roman characters in the same square form in order to preserve the grid layout of the text. These Roman characters that have been fitted to a square character cell are called fullwidth, while the normal ones are called halfwidth. In some fonts these are fitted to half-squares, like some monospaced fonts, while in others they are not. Often, fonts are available in two variants, one with the halfwidth characters monospaced, and another one with proportional halfwidth characters. The name of the typeface with proportional halfwidth characters is often prefixed with "P" for "proportional".
Finally, a keyboard may have a special key to tell the OS that the last kana entered should not be converted to kanji. Sometimes this is just the Return/Enter key.
Thumb-shift keyboards
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
A thumb-shift keyboard is an alternative design, popular among professional Japanese typists. Like a standard Japanese keyboard, it has hiragana characters marked in addition to Latin letters, but the layout is completely different. Most letter keys have two kana characters associated with them, which allows all the characters to fit in three rows, like in Western layouts. In the place of the space bar key on a conventional keyboard, there are two additional modifier keys, operated with thumbs - one of them is used to enter the alternate character marked, and the other is used for voiced sounds. The semi-voiced sounds are entered using either the conventional shift key operated by the little finger, or take place of the voiced sound for characters not having a voiced variant.
The kana-to-kanji conversion is done in the same way as when using any other type of keyboard. There are dedicated conversion keys on some designs, while on others the thumb shift keys double as such.
Romaji input
As an alternative to direct input of kana, a number of Japanese input method editors allow Japanese text to be entered using romaji, which can then be converted to kana or kanji. This method does not require the use of a Japanese keyboard with kana markings.
Mobile phones
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Keitai input
The primary system used to input Japanese on mobile phones is based on the numerical keypad. Each number is associated with a particular sequence of kana, such as ka, ki, ku, ke, ko for '2', and the button is pressed repeatedly to get the correct kana – each key corresponds to a column in the gojūon (5 row × 10 column grid of kana), while the number of presses determines the row.[1] Dakuten and handakuten marks, punctuation, and other symbols can be added by other buttons in the same way. Kana to kanji conversion is done via the arrow and other keys.
Flick input
Flick input is a Japanese input method used on smartphones. The key layout is the same as the Keitai input, but rather than tapping the key repeatedly, the user can swipe the key in a certain direction to produce the desired vowel.[1]
Other
Other consumer devices in Japan which allow for text entry via on-screen programming, such as digital video recorders and video game consoles, allow the user to toggle between the numerical keypad and a full keyboard (QWERTY, or ABC order) input system.
Kana to kanji conversion
After the kana have been input, they are either left as they are, or converted into kanji (Chinese characters). The Japanese language has many homophones, and conversion of a kana spelling (representing the pronunciation) into a kanji (representing the standard written form of the word) is often a one-to-many process. The kana to kanji converter offers a list of candidate kanji writings for the input kana, and the user may use the space bar or arrow keys to scroll through the list of candidates until they reach the correct writing. On reaching the correct written form, pressing the Enter key, or sometimes the "henkan" key, ends the conversion process. This selection can also be controlled through the GUI with a mouse or other pointing device.
If the hiragana is required, pressing the Enter key immediately after the characters are entered will end the conversion process and results in the hiragana as typed. If katakana is required, it is usually presented as an option along with the kanji choices. Alternatively, on some keyboards, pressing the muhenkan (無変換?) (literally "no conversion") button switches between katakana and hiragana.
Sophisticated kana to kanji converters (known collectively as input method editors, or IMEs), allow conversion of multiple kana words into kanji at once, freeing the user from having to do a conversion at each stage. The user can convert at any stage of input by pressing the space bar or henkan button, and the converter attempts to guess the correct division of words. Some IME programs display a brief definition of each word in order to help the user choose the correct kanji.
Sometimes the kana to kanji converter may guess the correct kanji for all the words, but if it does not, the cursor (arrow) keys may be used to move backwards and forwards between candidate words. If the selected word boundaries are incorrect, the word boundaries can be moved using the control key (or shift key, e.g. on iBus-Anthy) plus the arrow keys.
Learning systems
Modern systems learn the user's preferences for conversion and put the most recently selected candidates at the top of the conversion list, and also remember which words the user is likely to use when considering word boundaries.
Predictive systems
The systems used on mobile phones go even further, and try to guess entire phrases or sentences. After a few kana have been entered, the phone automatically offers entire phrases or sentences as possible completion candidates, jumping beyond what has been input. This is usually based on words sent in previous messages.
See also
- Japanese language and computers
- Japanese typewriter
- List of input methods for UNIX platforms
- Wāpuro rōmaji
- Wabun Code - Japanese Morse code
- List of CJK fonts
- Chinese input methods for computers
- Wnn
- Kotoeri
- ATOK
- Google Japanese Input
References
External links
- Microsoft (Office) IME CJK for Windows XP thru' Windows 7, see Windows#Multilingual support: IMEs and LIPs
- (Earlier obsolete) Global Input Method Editors (IMEs) (Links to CJK versions)
- Ajax IME: Web-based Japanese Input Method
- LiteType: Japanese Interactive Virtual Keyboard
- (Japanese) How to change between Japanese input methods (direct kana to rōmaji input) on Windows operating systems: ローマ字入力・ひらがな入力切替方法
