BMW M52
| BMW M52 engine | |
|---|---|
 |
|
| Overview | |
| Manufacturer | BMW, Bayerische Motoren Werke AG |
| Production | 1994–2000 |
| Combustion chamber | |
| Configuration | Straight-6 |
| Chronology | |
| Predecessor | BMW M50 |
| Successor | BMW M54 |
The BMW M52 is a straight-6 DOHC piston engine which was produced from 1994-2000. It was released in the E36 320i, to replace the M50. It was replaced by the M54 engine.
Compared with its M50 predecessor, the M52 uses an aluminium block. However, North American models used iron blocks instead (except in the Z3), therefore the North American M52 is more akin to the M50TU. Like the M50TU, the M52 uses variable valve timing on the intake camshaft (called single VANOS by BMW).
In 1998, the M52TU ("technical update") was released, adding variable valve timing to the exhaust camshaft (called dual VANOS by BMW). Other upgrades included electronic throttle control (which uses a throttle cable as backup)[1], a dual length intake manifold (called "DISA" by BMW) and revised cylinder liners.[2]
The M52 and S52 engines were on the Ward's 10 Best Engines list from 1997 to 2000.[3]
The S52 engine is used in USA versions of the 1996-1999 E36 M3 and the 1998-2000 Z3M. This engine is a tuned version of the M52 engine, as opposed to the S50 engine used for these cars in other markets.
Contents
Models
| Engine | Displacement | Power | Torque | Redline | Bore | Stroke | Compression ratio | Year |
|---|---|---|---|---|---|---|---|---|
| M52B20 | 1,991 cc (121 cu in) | 110 kW (150 hp) @ 5900 | 190 N·m (140 lb·ft) @ 4200 | 6500 | 80 mm (3.1 in) | 66 mm (2.6 in) | 11.0:1 | 1994 |
| M52TUB20 | 110 kW (150 hp) @ 5900 | 190 N·m (140 lb·ft) @ 3500 | 6500 | 80 mm (3.1 in) | 66 mm (2.6 in) | 11.0:1 | 1998 | |
| M52TUB24 | 2,394 cc (146 cu in) | 135 kW (181 hp) @ 5800 | 240 N·m (180 lb·ft) @ 3600 | 6500 | 84 mm (3.3 in) | 72 mm (2.8 in) | 2000 | |
| M52B25 | 2,494 cc (152 cu in) | 130 kW (170 hp) @ 5500 | 245 N·m (181 lb·ft) @ 3950 | 6500 | 84 mm (3.3 in) | 75 mm (3.0 in) | 10.5:1 | 1995 |
| M52TUB25 | 130 kW (170 hp) @ 5500 | 245 N·m (181 lb·ft) @ 3500 | 6500 | 84 mm (3.3 in) | 75 mm (3.0 in) | 10.5:1 | 1998 | |
| M52B28 | 2,793 cc (170 cu in) | 144 kW (193 hp) @ 5300 | 280 N·m (210 lb·ft) @ 3950 | 6500 | 84 mm (3.3 in) | 84 mm (3.3 in) | 10.2:1 | 1995 |
| M52TUB28 | 144 kW (193 hp) @ 5500 | 280 N·m (210 lb·ft) @ 3500 | 6500 | 84 mm (3.3 in) | 84 mm (3.3 in) | 10.2:1 | 1998 | |
| S52B32 | 3,152 cc (192 cu in) | 180 kW (240 hp) @ 6000 | 320 N·m (240 lb·ft) @ 3800 | 6500 | 86.4 mm (3.4 in) | 89.6 mm (3.5 in) | 10.5:1 | 1996 |
M52B20
A 1,991 cc (121 cu in) version was introduced in 1994. Bore is 80 mm (3.1 in) and stroke is 66 mm (2.6 in).[4]
Applications:
M52TUB20
The "technical update" in 1998 included dual VANOS, which improved low rpm torque.
Applications:
M52B24
2.4 L. For Thai market only.
M52B25
A 2,494 cc (152 cu in) version introduced in 1995.[5] It produces 125 kW (168 hp). Bore is 84 mm (3.3 in) and stroke 75 mm (3.0 in).
Applications:
M52TUB25
The "technical update" in 1998 included dual VANOS, which improved low rpm torque.
Applications:
M52B28
The 2,793 cc (170 cu in) version of the M52 debuted in 1995. It has a bore of 84 mm (3.3 in), a stroke of 84 mm (3.3 in) and produces 142 kW (190 hp).[6]
Applications:
- 1995-1998 E36 328i
- 1995-1998 E39 528i
- 1995-1998 E38 728i, 728iL
- 1997-1998 E36/7 Z3 2.8
- 1997-2000 Land Rover Defender (South Africa only)
M52TUB28
The "technical update" in 1998 included dual VANOS, which improved low rpm torque.
Applications:
Nikasil problems with high sulfur fuels
In the USA the M52B used an iron block (except for the M52B28 in the Z3 which was an aluminum block), while the M52TU used an aluminium cylinder block. The aluminum M52 engine received criticism in some markets with high levels of sulfur in the petrol during the late 1990s. Sulfur has a corrosive effect on Nikasil and led to many early M52 engines having premature bore-liner wear, only the M60 and the European M52 engines were affected.[7][8] Engines destined for high-sulfur gasoline markets, the United States among three others countries, had cast iron cylinder liners in the aluminum block to cope with this problem. With the exception of the cylinder liners, the basic aluminum block of the M52 engine was the same for all markets. [9][10]
S52 (North American Market)
The S52 is a higher performance version of the M52 which was used in North American E36 M3.
Compared to the equivalent S50 engine used elsewhere (by this time as the 3.2 litre version), the S52 is a less powerful and more closely on the US production M52 engine. As per the North American M52 engine, the S52 uses an iron block, aluminium head and single VANOS. Unique to the S52 is a bore of 86.4 mm (3.4 in) and stroke of 89.6 mm (3.5 in) for a total displacement of 3,152 cc. The engine is rated at 240 hp (179 kW) at 6,000 rpm and 236 lb·ft (320 N·m) of torque at 3,800 rpm.[11]
In addition to the larger displacement, the S52 utilizes the following special M components:[citation needed]
- Piston Rings
- Revised valve springs
- Lighter, hollow camshafts with more lift and duration
- Free-flowing exhaust system
Applications:
See also
References
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ http://www.unixnerd.demon.co.uk/m50.html
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
| « previous — BMW road car engine timeline, 1980s-2000s — next » | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1980s | 1990s | 2000s | |||||||||||||||||||||||||||||||||||||||
| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | ||||||||||||
| 4-cylinder petrol | << M10 | M40 | M43 | N40 / N42 | N43 / N45 / N46 >> | ||||||||||||||||||||||||||||||||||||
| M42 | M44 | ||||||||||||||||||||||||||||||||||||||||
| S14 | |||||||||||||||||||||||||||||||||||||||||
| 6-cylinder petrol | << M20 | M50 | M52 | M54 / M56 | N52 | N53 >> | |||||||||||||||||||||||||||||||||||
| N54 | N55 >> | ||||||||||||||||||||||||||||||||||||||||
| S50 / S52 | S54 | ||||||||||||||||||||||||||||||||||||||||
| << M30 | |||||||||||||||||||||||||||||||||||||||||
| << M88 / M90 | S38 | ||||||||||||||||||||||||||||||||||||||||
| M102 | M106 | ||||||||||||||||||||||||||||||||||||||||
| 8-cylinder petrol | M60 | M62 | N62 | N63 >> | |||||||||||||||||||||||||||||||||||||
| S62 | |||||||||||||||||||||||||||||||||||||||||
| S65 >> | |||||||||||||||||||||||||||||||||||||||||
| 10-cylinder petrol | S85 | ||||||||||||||||||||||||||||||||||||||||
| 12-cylinder petrol | M70 | M73 | N73 | N74 >> | |||||||||||||||||||||||||||||||||||||
| S70 | |||||||||||||||||||||||||||||||||||||||||
