Bunbury Bridge
Bunbury Bridge was a single-track, timber railway bridge in East Perth in Western Australia. The bridge crossed the Swan River near Claise Brook and was built for passenger and freight traffic to Bunbury on the South Western Railway, and was also part of the Armadale railway line.
The Bunbury Bridge (then called the Swan Bridge[1]) was built in 1892 by Atkins and Law.[2] Construction was delayed due to troubles with sinking the Jarrah piles into the soft riverbed: they were intended to be sunk 42 feet (13 m) below the water level, but reached this depth under their own weight as soon as they were put in position. Ultimately, they had to be driven to 85 to 96 feet (26 to 29 m) before a solid footing was found.[1]
The bridge was opened as part of the Perth to Bunbury Railway which was officially opened on 8 September 1893 by Governor Robinson.[3][4][5] Following concerns for its safety, a so-called "temporary" replacement bridge was built between 1930[6] and 1932.[7][8][9]
Locals referred to the Bunbury Bridge as "Big Bunna", and the smaller bridge which crossed the nearby Burswood Canal at Riversdale (Rivervale) as "Little Bunna".[citation needed]
After 63 years of use, the temporary structure was closed when a new concrete railway bridge opened in 1995.[10][11] The old timber bridge was demolished in early 1996. The 1995 concrete dual-track Goongoongup Bridge was built as part of the electrification of Perth's suburban railways. Windan Bridge (opened April 2000) is immediately adjacent and carries road traffic from the Graham Farmer Freeway.
See also
References
- ↑ 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ "
Chapter 21". History of West Australia. Wikisource. 1897. p. 339. - ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Bunbury Bridge, East Perth – history of the bridge built in 1932 and plans for its replacement Westrail News, April 1993, p.5
- ↑ Bunbury Bridge, East Perth – $10m contract awarded to Transfield Constructions for new bridge construction Westrail News, Feb. 1994, p.1,6
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
Lua error in package.lua at line 80: module 'strict' not found.
<templatestyles src="Asbox/styles.css"></templatestyles>
 |
This Western Australia article is a stub. You can help Wikipedia by expanding it. |
<templatestyles src="Asbox/styles.css"></templatestyles>
  |
This article about a bridge in Australia is a stub. You can help Wikipedia by expanding it. |
- Pages with broken file links
- Articles with unsourced statements from October 2012
- East Perth, Western Australia
- Bridges in Perth, Western Australia
- Bridges completed in 1898
- Bridges completed in 1932
- Swan River (Western Australia)
- Armadale railway line
- South Western Railway, Western Australia
- Burswood, Western Australia
- Buildings and structures demolished in 1996
- Railway bridges in Western Australia
- Former railway bridges
- Western Australia stubs
- Australian bridge (structure) stubs
