EMD 1010

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

The EMD 1010[note 1] is a line of four-stroke diesel engines manufactured by Electro-Motive Diesel. The precursor to the 1010 was introduced c. 1998 as the 265H or H-Engine,[note 2] The H-engine was initially designed for use as a 6300 hp 16 cylinder engine in the EMD SD90MAC, however the early engine were found to be unreliable, and unsuccessful in the market, with the proven EMD 710 2-stroke design being preferred. The EMD four-stroke engine was resurrected in 2015 to meet EPA Tier 4 emissions regulations.

History

H-Engine

Development of the H-engine was announced in 1994 as a railway locomotive specific engine - the design was influenced by the transition to AC traction motors, which had increased adhesion and tractive effort characteristics, allowing an increase in usable power to be usefully converted traction - thus the new design was to have 6,000 horsepower (4,500 kW) available for traction - a 6000 hp locomotive design would allow two to one replacement of the very common 3000 hp SD40-2 locomotives.[1]

Instead of a development of its two stroke design EMD chose to develop a new four stroke engine, with potential for reduced emissions being one factor in favor of the change of design. EMD had investigated the potential of four-stroke designs in 1984, building two prototype 4,500 horsepower (3,400 kW) 16 cylinder "854H" engines.[1]

The new engine was designed using modern techniques, including 3D modelling, finite element analysis, computational fluid dynamics, and other simulations, as well as using real world fatigue and other testing. The initial locomotive designed to use the H-engine was the SD90MAC. The crankcase design switched to Ductile cast iron from welded steel (in the 2 stroke series); like the 2 stroke designs the new engine incorporated unitised power assemblys, whilst the V connecting rods switched from fork and blade to side by side; Electronic Fuel Injection replaced mechanical mechanisms. Each engine incorporated two turbochargers -one per cylinder bank. Eight engines were produced and tested at the Transportation Technology Centre of the Association of American Railroads in Pueblo, Colorado.[1]

The EMD 265H had a bore of 265 millimetres (10.4 in) stroke of 300 millimetres (12 in) with the 16 cylinder GM16V265H rated at 4,700 kilowatts (6,300 hp) at 1000rpm, with a Brake mean effective pressure of 21.3 bars (2,130 kPa).[1]

Union Pacific began using some H-engined SD90MAC locomotives in commercial service in 1998.[1]

Initial orders for the 265H engine powered locomotives were delivered powered by 4300 hp EMD710 engines, intended to be converted to the 4 stroke design later once the engine's teething troubles has be resolved. (see SD9043MAC) - Canadian Pacific, Union Pacific and lessor CEFX acquired this locomotive type. Only CP and UP operated H-engine powered units (SD90MAC-H) - UPs fleet was returned to EMD after the lease expired.[2] Considered unsuccessful in the domestic market due to reliability issues and limited operational flexibility of the 6000 horsepower engine,[3] all 265H-powered versions in North America and Australia have been repowered with 4300 horsepower 16V710G engines or scrapped.[citation needed]

The 265H engine was also used overseas: in 2005 an order for 300 6,000 horsepower (4,500 kW) Tier 2 engines was received from the Chinese Railways, with final assembly a Dalian Locomotive Factory,[4][5] introduced from 2009 as "Harmony" HXN3 class (aka EMD JT56ACe);[6] orders were also received from India;[citation needed] and Australian mining railroads.[citation needed] Tidewater Marine acquired twenty 16 cylinder engines for marine use in tugboats in 2002.[7]

The 16-265H remains the most powerful diesel engine ever produced by EMD.

J-Engine

The four-stroke engine design was re-introduced in the mid 2010s to meet EPA Tier 4 emission standards, without using Urea-based diesel exhaust fluid. The first (pre-production) locomotive using the 1010J engine, the SD70ACe-T4, using a 4,600 horsepower (3,400 kW) (4,400 traction hp) 12 cylinder engine was unveiled in late 2015.[8][9]

The block designation was changed to J to reflect the changes to the new engine, which included power assembly and block redesigns, as well as the addition of a two-stage turbocharging system consisting of three turbochargers.[citation needed] Other new features are an EGR system to reduce exhaust emissions and double-walled fuel injection to increase safety.

Versions

ID Number of cylinders Induction Max rpm Power (hp) Power (MW) Introduced Locomotive(s)
12-265H 12 2 x Turbocharger 1000 4,725 3.52 1996 EMD SD89MAC
16-265H 16 2 x Turbocharger 1000 6,300 4.7 1996 EMD SD90MAC, EMD JT56ACe (China Railways HXN3)
12-1010J 12 3 x Turbocharger 1000 4,600 3.4 2015 SD70ACe-T4

See also

Notes

  1. ↑ Named for its displacement per cylinder, ie 1,010 cubic inches (16,600 cm3) - its 2-stroke (2-cycle) predecessors were also named in the same fashion - see EMD 710, EMD 645, EMD 567.
  2. ↑ The numerical designation indicating the diameter of the bore in millimeters.

References

  1. ↑ 1.0 1.1 1.2 1.3 1.4 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
Retrieved from "https://infogalactic.com/w/index.php?title=EMD_1010&oldid=723019059"