JCSAT-RA

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Lua error in Module:Infobox at line 199: malformed pattern (missing ']'). JCSAT-RA, previously known as JCSAT-12,[2] is a Japanese geostationary communications satellite, which is operated by JSAT Corporation. It was ordered to replace the JCSAT-11 satellite which was lost in a launch failure on a Proton-M/Briz-M rocket in 2007, and is currently used as an on-orbit spare satellite; a role in which it replaced the older JCSAT-R spacecraft, providing a reserve for if one of the company's other satellites fails. It is a 4,000-kilogram (8,800 lb) satellite, which was constructed by Lockheed Martin based on the A2100AX satellite bus, with the same configuration as JCSAT-10 and JCSAT-11.[2] The contract to build JCSAT-12 was awarded on 6 September 2007, the day after JCSAT-11 failed to reach orbit.[3]

It was launched, along with the Australian Optus D3 satellite, by Arianespace.[4] An Ariane 5ECA rocket was used for the launch, which occurred from ELA-3 at the Guiana Space Centre in Kourou, French Guiana. The launch took place at 22:09 GMT on 21 August 2009, at the start of a 60 minute launch window.

JCSAT-12 separated from its carrier rocket into a geosynchronous transfer orbit, from which raise itself to geostationary orbit using a LEROS-1C apogee motor. It has a design life of fifteen years, and carries forty two transponders; twelve G/H band, and thirty J band (US IEEE C and Ku bands respectively).[5]

See also

References

<templatestyles src="Reflist/styles.css" />

Cite error: Invalid <references> tag; parameter "group" is allowed only.

Use <references />, or <references group="..." />


<templatestyles src="Asbox/styles.css"></templatestyles>

<templatestyles src="Asbox/styles.css"></templatestyles>

  1. 1.0 1.1 1.2 1.3 1.4 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.