Brookville BL20GH

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Brookville BL20GH
Metro-North Railroad Connecticut DOT Brookville BL20GH 129.jpg
CNDX BL20GH #129 at Croton Shops
Type and origin
Power type Diesel
Builder Brookville Equipment Corporation
Build date 2008
Total produced 12
Specifications
AAR wheel arr B-B
Loco weight 132 short tons (118 long tons; 120 t)
Fuel capacity 2,600 US gallons (9,800 L; 2,200 imp gal)
Prime mover MTU-Detroit Diesel 12V4000
Engine type V12 diesel
Alternator Kato
Generator Caterpillar
Traction motors D78
Cylinders 12
Performance figures
Maximum speed 75 mph (121 km/h)
Power output 2,250 hp (1.68 MW)
Career
Operators Metro-North Railroad
Numbers <templatestyles src="Plainlist/styles.css"/>
  • 110–115 (MNRR)
  • 125–130 (CDOT)
First run 9 June 2008
[1][2]

The Brookville BL20GH or BL20-GH is a diesel-electric locomotive built by the Brookville Equipment Corporation. The locomotive is designed for both freight and passenger service. Brookville built 12 in 2008 for the Metro-North Railroad.

Design

The BL20GH uses a V12 MTU-Detroit Diesel 12V4000 engine rated at 2,250 horsepower (1,680 kW). It has a separate Caterpillar engine for head end power, allowing the locomotive to be used in passenger service for branch line shuttle trains.[3] The Metro-North locomotives are equipped with Automatic train control (ATC).[2] The BL20GH is a low emissions locomotive.[citation needed]

History

Brookville built a single demonstrator for the Connecticut Department of Transportation (CDOT); CDOT and the Metro-North combined to order eleven more in 2008, for a total of twelve locomotives.[4] CDOT owns six of the locomotives, which it painted in its "McGinnis" paint scheme, named after former New York, New Haven and Hartford Railroad president Patrick B. McGinnis. This scheme consists of a black nose, with a white stripe and an orange rear, with white New-Haven lettering overlapping the orange rear. The first public run occurred on June 9, 2008.[1]

These locomotives are used in branch service on the Metro-North Railroad, including the Danbury Branch and Waterbury Branch.[5] They are used on shuttle trains operating on routes where there is no third rail (such as the tracks from Southeast to Wassaic). They lack third-rail shoes and thus rarely operate into Grand Central Terminal.[citation needed]

References

<templatestyles src="Reflist/styles.css" />

Cite error: Invalid <references> tag; parameter "group" is allowed only.

Use <references />, or <references group="..." />

External links


<templatestyles src="Asbox/styles.css"></templatestyles>

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found. (subscription required)
  5. Lua error in package.lua at line 80: module 'strict' not found.